Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Burnsville?
Spring replacement in Burnsville typically costs $180 – $340 for one torsion spring, installed. A matched pair is usually replaced together, so a pair runs about double that range, roughly $360 – $680. The written estimate sets the final price, and we give that estimate free before any work starts.
Most spring jobs are done in a single visit, and same-day service is often possible when you call early. If your door won’t lift or you heard a loud bang from the garage, the spring is the first thing to check, and it’s one of the few garage door parts you shouldn’t touch yourself.
Key Takeaways
- One torsion spring: $180 – $340. A matched pair: about $360 – $680.
- Extension springs on older doors usually cost less than torsion setups.
- Burnsville’s cold winters and heavy daily use shorten spring life, so replacement timing matters more than price shopping.
- Springs are under high tension. This is a trained-technician job with real injury risk, not a DIY repair.
- Free estimates, upfront pricing, and same-day service when scheduling allows. Call (844) 443-4836.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers usually land for a Burnsville homeowner. These are typical estimated ranges for our market, not quotes. Every job gets its own written estimate.
| Item | Typical Estimated Range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair of torsion springs | $360 – $680 |
| Extension spring replacement (older doors) | Usually at the lower end of the spring range |
| Spring replacement plus cable repair | $310 – $590 |
| Spring replacement plus roller replacement | $290 – $560 |
| Spring replacement plus track realignment | $300 – $580 |
For comparison, the broader garage door repair range in Burnsville is $150 – $600, and cable repair alone runs $130 – $250. Those numbers help you sanity-check a quote that bundles spring work with something else.
What pushes a spring job toward the top of the range? A double door with a pair of springs instead of a single one. Springs that failed because a cable or roller was already worn, which means two repairs in one visit. A door with a broken spring and a bent track, since both need correcting before the door operates safely. What keeps it low? A single spring on a standard single-car door, no collateral damage, and easy access in the garage.
What Affects Spring Replacement Pricing in Burnsville
- Spring type and count. Torsion springs sit on a shaft above the door; extension springs run along the sides on many older doors. Torsion setups on double doors usually use a matched pair, which is why the pair price is roughly twice the single.
- Door weight and size. A two-car door carries heavier springs than a single-car door. Heavier springs cost more and take more care to tension safely.
- Burnsville winters. The Twin Cities metro swings from humid summer heat to hard freezes, and that cycle works on steel springs. A garage that stays cold for months speeds up fatigue. If your door has been sluggish every January, the spring is telling you something.
- Related wear found during the job. A spring rarely fails in isolation. Cables, rollers, and the center bearing plate are all in the same wear zone. If any of those need replacing, the visit costs more, but you avoid a second trip.
- Door age and brand. We work with Clopay, Amarr, Wayne Dalton, Raynor, and other major brands daily, so we know the spring configurations those doors use and can match the right part without guesswork.
- Access and safety setup. A cluttered garage, a door blocked by stored items, or a car parked in the way all add time. Clearing the area before we arrive keeps the job moving.
How to Save on Spring Replacement
You can’t cheap out on the spring itself without paying for it later, but you can keep the total down in a few practical ways.
- Replace the pair together. When one torsion spring on a two-spring door snaps, the other is almost always at the same point in its life. Replacing both in one visit costs less than two separate calls, and you avoid a second failure weeks later.
- Fix the small stuff at the same time. If a roller is squealing or a cable looks frayed, handle it during the spring visit instead of booking a second appointment. Roller replacement runs $110 – $220 on its own, and bundling saves the trip charge.
- Get the free estimate before you commit. We quote the job in writing up front, so there’s no surprise line item at the end. Call (844) 443-4836 and we’ll walk you through it.
- Don’t wait for a total failure. A spring that’s stretched or making noise is cheaper to swap on your schedule than to fix after it snaps and the door slams down.
- Keep the door balanced. A door that’s been running hard against a worn spring wears everything else faster. A quick balance check during any service visit goes a long way.
Why Spring Repair Is a Job for a Specialist
Torsion springs hold enough stored energy to cause serious injury. They’re wound tight to counterbalance a door that can weigh hundreds of pounds, and releasing that tension the wrong way is genuinely dangerous. We handle spring work as a named, specialized service because it demands the right tools, the right technique, and a technician who does it constantly.
Our technicians have up to 14 years of experience, and garage doors are all we do. That focus matters here. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so when we open your garage and see a particular spring setup, we already know what we’re looking at. Brand-specific expertise, not guesswork.
If you’d rather understand the process before you book, our spring replacement page lays out how a typical visit goes from start to finish. And if you’re comparing the whole picture, the broader Burnsville Garage Door Repair Pros hub covers every service we offer under one roof.
When Replacement Beats Waiting
Not every noisy spring needs replacing today. But some signs mean it’s time.
- The door won’t lift, or lifts a few inches and stops. That usually means a broken spring.
- You heard a loud bang from the garage, often followed by the door feeling suddenly heavy.
- The door feels much heavier than it used to when you lift it by hand (with the opener disconnected, and only if you can do so safely).
- The spring shows a visible gap or looks stretched and loose.
- The opener strains or the door slams down instead of lowering smoothly.
A snapped spring also leaves the door in a vulnerable position, and a garage door that won’t close is a security concern for any Burnsville home. That’s why emergency service is a core part of what we do, not an afterthought. When a spring fails, we move fast.
What a Spring Replacement Visit Involves
Here’s the general shape of the job, so you know what you’re paying for.
- Safety check and diagnosis. We inspect the springs, cables, rollers, tracks, and opener to confirm the spring is the failure and see whether anything else is worn.
- Door secured. The door is locked in place and the tension released safely before any spring comes off.
- Old springs removed and new ones matched. The replacement spring is sized to your door’s weight and cycle life, not grabbed off a shelf.
- New springs installed and tensioned. This is the part that takes skill and care. Getting the wind count right is what makes the door balance and last.
- Balance and operation test. We run the door through full cycles, check the balance, and confirm the opener isn’t fighting the door.
Most spring jobs are done in one visit. If we find a cable or roller that also needs replacing, we’ll show you and quote it before doing the work.
The Cost of Getting It Wrong
A spring replacement done with the wrong spring, the wrong wind, or the wrong technique doesn’t just cost money. It puts a heavy door on a weakened system, which strains the opener, wears the cables, and risks the door coming down. We size every spring to the door and test the balance before we leave. From a snapped spring to a full new installation, one call covers it, and you won’t need to bring in a second provider when the next issue comes up.
If the door is older and the repair bill is climbing toward the price of a new one, our garage door installation service is worth a look. New door installation in Burnsville typically runs $700 – $2200, and we’ll tell you honestly whether repair or replacement makes more sense for your situation.
We also handle garage door repair for panel damage and general breakdowns, opener repair when the motor or logic board is failing, and panel replacement when a dent or crack has compromised the door. If a spring failure bent a track on the way down, track realignment runs $120 – $240 and usually happens in the same visit.
Working With a Garage-Door-Only Specialist in Burnsville
Plenty of handyman services will take a spring job. Fewer do it every day. We work only on garage doors, which means every tool on the job is built for this trade and every technician does this work exclusively. When we look at your door, we compare it against the thousands of spring setups we’ve seen on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors. That’s the difference between guessing at a part number and knowing it.
We also offer the full range of garage door work, so a spring replacement, an opener repair, or a complete new installation all come from the same place. You don’t have to start over with a new provider as your door ages. We can also work with your insurer if a covered event damaged the door.
Homeowners across the Burnsville area call on us when a door fails, whether it’s a spring this afternoon or a whole new door next spring. If you’re comparing options, our garage door service page shows how we handle each type of job, and our emergency garage door repair service is there when you can’t wait. We also serve Eagan, Apple Valley, Savage, and Lakeville, so if you’re just outside Burnsville, we likely cover your street too. For a deeper look at spring mechanics and lifespan, our garage door springs guide explains what a spring actually does and why the right size matters.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Burnsville?
Expect $180 – $340 for one torsion spring, installed. A matched pair on a double door usually runs $360 – $680 because both springs are replaced together. The written estimate sets the final price. Call (844) 443-4836 for an exact quote, free of charge.
Should I replace one spring or both?
Replace both if your door has two torsion springs and one has broken. The second spring is at the same point in its life, so replacing the pair in one visit costs roughly twice a single spring but usually less than two separate service calls. We’ll check the second spring during the estimate and tell you exactly where it stands. Call (844) 443-4836 to book.
Is it cheaper to repair or replace a garage door with a broken spring?
Repair is almost always cheaper. At $180 – $340 for one spring or $360 – $680 for a pair, spring replacement costs far less than new door installation at $700 – $2200. Only an older door with structural or panel damage tends to make replacement the better call. We’ll give you a straight answer after the free estimate. Call (844) 443-4836.
Can you come today if my spring breaks?
Often yes. Same-day spring service is frequently available when you call in the morning, and emergency service is part of what we do because a broken spring leaves the door stuck and your garage unsecured. Call (844) 443-4836 early for the best chance at a same-day visit.
How long do replacement springs last in a Burnsville climate?
Springs are rated in cycles, and the average door opens and closes several times a day. With Burnsville’s cold winters and hot summers working on the steel, most springs wear out well before their rated life is reached. A spring that’s been sluggish every winter or making noise is worth inspecting before it fails. Call (844) 443-4836 and we’ll check it.
Pricing reflects the Burnsville market as of 2026. Burnsville Garage Door Repair Pros offers free estimates – call (844) 443-4836.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Doug Hayes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Henry Nguyen"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Adam Doyle