Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Burnsville?
Panel replacement in Burnsville typically costs $250 – $500, depending on how many sections are damaged, what material the door is made from, and whether the panels are still in production. A single dented bottom section on a common Clopay or Amarr door sits at the low end. A multi-panel job on a discontinued Wayne Dalton model, or a full reface on a wide two-car door, reaches the top of that range.
That figure covers the panel itself, removal of the old section, and correct re-fitting so the sections align and the door still seals against the weatherstripping. It is an estimate, not a final bill; the written estimate we give you after seeing the door is what sets the actual price. Call (844) 443-4836 and we’ll get a free estimate out to you.
Panel Replacement Cost Breakdown (2026)
Here’s how the individual pieces of a panel job break out for a typical Burnsville home. These are estimated ranges for 2026, and the written estimate is always the final word.
| Work item | Typical estimated cost |
|---|---|
| Single panel, standard steel, still in production | $250 – $380 |
| Multiple panels (two to three sections replaced together) | $380 – $500 |
| Insulated or higher-grade panel | $350 – $500 |
| Discontinued or special-order panel, if sourced | Toward the top of $250 – $500 |
| Panel plus track realignment after impact | Add a track realignment estimate on top |
What pushes a panel job up: the number of damaged sections, insulation, a color or profile that’s no longer stocked, and any track or hinge damage from the impact that bent the panel in the first place. What pulls it down: a single standard steel section on a brand that’s still manufactured, especially on a Clopay, Amarr, or Raynor door still in production. Because we specialize in garage doors rather than running a catch-all handyman service, we work on Burnsville Garage Door Repair Pros doors from eight major brands every week, so we can usually tell you right away whether a matching panel still exists or whether a full replacement makes more sense.
What Affects Panel Replacement Pricing in Burnsville
- The number of sections. One dented bottom panel costs far less than two or three sections bent together after a car nudges the door. Pricing scales with each section replaced.
- Panel material and insulation. Standard steel is the least expensive to replace. Insulated and thicker-gauge panels cost more because the material itself does.
- Whether the panel is still made. This is the big one in Burnsville’s older housing stock. A door that’s still in current production means a straightforward matching panel; a discontinued profile can push you toward a full new door rather than a single-panel fix.
- The brand. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors, and knowing each line saves time and guesswork when sourcing the correct section. Brand-specific expertise, not guesswork.
- Collateral damage. A hit hard enough to dent a panel often tweaks the track, hinges, or rollers with it. Those are separate line items, so it helps to know they may come into the estimate.
- Burnsville’s freeze-thaw cycle. Winters that swing above and below freezing stress the weather seal and hardware around the panels. A door that’s been leaking cold air at the bottom is a common reason a lower panel gets replaced rather than repaired.
How to Save on Panel Replacement
The single most useful thing you can do is find out whether a matching panel still exists before you commit to anything. Replace a damaged section early, while simpler and cheaper, rather than waiting until the bend spreads stress into the track and hinges. Keeping the door clear of stored items near the inside track prevents the everyday knocks that lead to panel damage. And if the door is old enough that a matching panel is no longer made, it’s worth comparing a partial panel replacement against a garage door repair in Burnsville approach that reuses the sound sections, or against a garage door installation in Burnsville if the whole door is past saving.
We keep estimates free and upfront, so there’s no cost to finding out exactly what your door needs. If a panel fix will do, we’ll tell you; if a new door is more sensible, we’ll show you why. Call (844) 443-4836 to book a free estimate.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Burnsville?
Panel replacement in Burnsville typically runs $250 – $500, with a single standard steel section near the bottom of that range and multi-panel or discontinued-profile jobs toward the top. Call (844) 443-4836 for a free estimate that accounts for your specific door.
Is it cheaper to repair or replace a garage door panel?
Replacing a single panel is almost always cheaper than a full door, often by hundreds of dollars. A garage door spring repair or opener fix is separate and usually inexpensive too. If the panels are discontinued or most of the door is damaged, a new door can win out; we’ll tell you which way the numbers point.
Can you replace just one panel?
Yes, in most cases we replace only the damaged section, which is why the low end of the range starts around $250. The one catch is availability: if the profile is discontinued, we’ll look at matching options or a bigger fix. See our garage door repair page for what a single-section job involves.
Does a broken spring or opener repair cost more than a panel?
They’re priced separately. A garage door spring repair typically costs $180 – $340 for one spring, and a garage door opener repair in Burnsville runs $120 – $320. For detailed numbers, our garage door spring repair price guide lays them out, and so does opener repair costs and what causes them.
Can you come today for a panel estimate?
We offer free estimates and same-day service where possible, and emergency garage door service is part of what we do, so a door that’s stuck open or unsafe gets priority. Call (844) 443-4836 and we’ll get a technician scheduled for a free estimate.
Pricing reflects the Burnsville market as of 2026. Burnsville Garage Door Repair Pros offers free estimates – call (844) 443-4836.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Doug Hayes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Henry Nguyen"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Adam Doyle